The archived outline of the El Portal Fire spans about 5.2 km from west to east and 7.5 km from south to north. CAL FIRE places the incident at Near Highway 140 and community of El Portal. The mapped boundary provides a second way to locate the event: it shows the extent around that reference location.
| Start listed by CAL FIRE | 26 July 2014 |
|---|---|
| County listing | Mariposa |
| Reported area in hectares | 1,898 ha (converted from acres) |
| Extent of the mapped outline | 5.2 × 7.5 km (west–east × south–north) |
| Containment entry in the archive | 10 August 2014 |
| Perimeter collection method as recorded | Autonomous GPS |
What the perimeter shows
The two spans differ by only 2.3 km. That does not make this a circular burn: the dimensions measure the outermost coordinates, leaving indentations and gaps invisible. Use the polygon itself, rather than its enclosing rectangle, to check whether a location intersects the footprint.
Two estimates of area
The incident report gives 4,689 acres; the interagency feature stores 4,744.6 GIS acres. The mapped value is 55.6 acres above the reported value (1.19%). This compares two published measurements, not two observation times. The difference cannot be read as fire growth.
A similar-sized fire for comparison
The Tick Fire of 2019 is the closest match by reported acreage in this 100-case collection (4,615 acres). Its mapped spans are 8.0 by 5.6 km, west–east then south–north, versus 5.2 by 7.5 km here. The longer axes run in different directions. Matching on acreage would miss that contrast.
Sources and map method
- El Portal Fire · CAL FIRE incident record
- NIFC interagency history · source perimeter (GeoJSON)
- Tick Fire · comparison incident
- Comparison perimeter · interagency record
Spans use the geographic extremes of a generalized boundary, converted to kilometres at its middle latitude. They are approximate map dimensions, not distances travelled by flames. The GIS acreage is the source attribute, not an area recalculated from the simplified outline.