The archived outline of the Beaver Fire spans about 20.2 km from west to east and 13.7 km from south to north. CAL FIRE places the incident at north of Highway 96, off of Beaver Creek Road. The mapped boundary provides a second way to locate the event: it shows the extent around that reference location.
| Start listed by CAL FIRE | 30 July 2014 |
|---|---|
| County listing | Siskiyou |
| Reported area in hectares | 13,151 ha (converted from acres) |
| Extent of the mapped outline | 20.2 × 13.7 km (west–east × south–north) |
| Containment entry in the archive | 2 September 2014 |
What the perimeter shows
The two spans differ by only 6.5 km. That does not make this a circular burn: the dimensions measure the outermost coordinates, leaving indentations and gaps invisible. Use the polygon itself, rather than its enclosing rectangle, to check whether a location intersects the footprint.
Two estimates of area
The incident report gives 32,496 acres; the interagency feature stores 32,493.4 GIS acres. The mapped value is 2.6 acres below the reported value (0.01%). This compares two published measurements, not two observation times. The difference cannot be read as fire growth.
A similar-sized fire for comparison
The Eiler Fire of 2014 is the closest match by reported acreage in this 100-case collection (32,416 acres). Its mapped spans are 12.8 by 22.7 km, west–east then south–north, versus 20.2 by 13.7 km here. The longer axes run in different directions. Matching on acreage would miss that contrast.
Sources and map method
- Beaver Fire · CAL FIRE incident record
- NIFC interagency history · source perimeter (GeoJSON)
- Eiler Fire · comparison incident
- Comparison perimeter · interagency record
Spans use the geographic extremes of a generalized boundary, converted to kilometres at its middle latitude. They are approximate map dimensions, not distances travelled by flames. The GIS acreage is the source attribute, not an area recalculated from the simplified outline.